Fracture resistance and bonding performance after antioxidants pre-treatment in non-vital and bleached teeth.

This study aimed to evaluate the effect of antioxidant solutions on fracture strength and bonding performance in non-vital and bleached (38% hydrogen peroxide) teeth. One hundred and eighty dentin specimens were obtained, 60 for each test: fracture strength, hybrid layer thickness, and bond strength. The groups (n=10) were randomly composed according to post-bleaching protocol: REST - restoration, without bleaching; BL - bleaching + restoration; SA - bleaching, 10% sodium ascorbate solution, and restoration; AT - bleaching, 10% α-tocopherol solution, and restoration; CRAN - bleaching, 5% cranberry solution, and restoration; CAP - bleaching, 0.0025% capsaicin solution, and restoration. Data were analyzed with ANOVA, Kruskal-Wallis, Dunn, and Qui-Square tests (α=0.05). The highest fracture strength values were observed in REST (1508.96 ±148.15 N), without significant difference for the bleached groups (p>0.05), regardless of the antioxidant use. The hybrid layer thickness in the group that was not subjected to bleaching (REST) was significantly higher than in any other group. The bond strength in the bleached and antioxidants-treated groups (SA, AT, CRAN, CAP) has no differences with the bleached group without antioxidants (BL). Adhesive failures were predominant in the groups that did not receive the antioxidant application. In conclusion, the evaluated antioxidants did not show an effect on the fracture strength, hybrid layer thickness, or bond strength of dentin bleached after endodontic treatment. The application of 10% sodium ascorbate, 10% alpha-tocopherol, 5% cranberry, or 0.0025% capsaicin solutions is not an effective step and should not be considered for the restorative protocols after non-vital bleaching.

Fracture resistance and bonding performance after antioxidants pre-treatment in non-vital and bleached teeth

Abstract This study aimed to evaluate the effect of antioxidant solutions on fracture strength and bonding performance in non-vital and bleached (38% hydrogen peroxide) teeth. One hundred and eighty dentin specimens were obtained, 60 for each test: fracture strength, hybrid layer thickness, and bond strength. The groups (n=10) were randomly composed according to post-bleaching protocol: REST - restoration, without bleaching; BL - bleaching + restoration; SA - bleaching, 10% sodium ascorbate solution, and restoration; AT - bleaching, 10% α-tocopherol solution, and restoration; CRAN - bleaching, 5% cranberry solution, and restoration; CAP - bleaching, 0.0025% capsaicin solution, and restoration. Data were analyzed with ANOVA, Kruskal-Wallis, Dunn, and Qui-Square tests (α=0.05). The highest fracture strength values were observed in REST (1508.96 ±148.15 N), without significant difference for the bleached groups (p>0.05), regardless of the antioxidant use. The hybrid layer thickness in the group that was not subjected to bleaching (REST) was significantly higher than in any other group. The bond strength in the bleached and antioxidants-treated groups (SA, AT, CRAN, CAP) has no differences with the bleached group without antioxidants (BL). Adhesive failures were predominant in the groups that did not receive the antioxidant application. In conclusion, the evaluated antioxidants did not show an effect on the fracture strength, hybrid layer thickness, or bond strength of dentin bleached after endodontic treatment. The application of 10% sodium ascorbate, 10% alpha-tocopherol, 5% cranberry, or 0.0025% capsaicin solutions is not an effective step and should not be considered for the restorative protocols after non-vital bleaching.

Resumo Este estudo teve como objetivo avaliar o efeito de soluções antioxidantes na resistência à fratura e resistência de união em dentes tratados endodonticamente e clareados (38% de peróxido de hidrogênio). Cento e oitenta espécimes de dentina foram obtidos, 60 para cada teste: resistência à fratura, espessura da camada híbrida e resistência de união. Os grupos (n=10) foram compostos aleatoriamente de acordo com o protocolo pós-clareamento: REST - restauração, sem clareamento; BL - clareamento + restauração; SA - clareamento, solução de ascorbato de sódio a 10% e restauração; AT - clareamento, solução de α-tocoferol a 10% e restauração; CRAN - clareamento, solução de cranberry a 5% e restauração; CAP - clareamento, solução de capsaicina 0,0025% e restauração. Os dados foram analisados ​​com os testes ANOVA, Kruskal-Wallis, Dunn e Qui-Quadrado (α=0,05). Os maiores valores de resistência à fratura foram observados em REST (1508,96 ±148,15 N), sem diferença significativa para os grupos clareados (p>0,05), independente do uso de antioxidantes. A espessura da camada híbrida no grupo que não foi submetido ao clareamento (REST) foi significativamente maior do que em qualquer outro grupo. A resistência de união nos grupos clareado e tratado com antioxidantes (SA, AT, CRAN, CAP) não apresentou diferenças com o grupo branqueado sem antioxidantes (BL). As falhas adesivas foram predominantes nos grupos que não receberam a aplicação do antioxidante. Em conclusão, os antioxidantes avaliados não mostraram efeito sobre a resistência à fratura, espessura da camada híbrida ou resistência de união à dentina clareada após tratamento endodôntico. A aplicação de soluções de ascorbato de sódio 10%, alfa-tocoferol 10%, cranberry 5% ou capsaicina 0,0025% não é uma etapa eficaz e não deve ser considerada para os protocolos restauradores após clareamento não vital.

Effect of non-vital tooth bleaching photoactivated with blue or violet LED on color and microhardness.

BACKGROUND: To evaluate the efficacy of dental bleaching protocols using 35% hydrogen peroxide photoactivated with violet LED on color and microhardness of endodontically treated teeth. METHODS: Forty specimens were selected and randomized into 4 groups (n = 10): C - Control, HP - 35% hydrogen peroxide, HP + BL - 35% hydrogen peroxide + blue LED, HP + VL - 35% hydrogen peroxide + violet LED. Three bleaching sessions were performed for each group. Color analysis was performed 7 days after each bleaching session. Two-way repeated measure ANOVA and Bonferroni test were used to evaluate the effect of different bleaching protocols and evaluation times on the dependent variables (∆E and ∆L). Dentin microhardness was measured 24 h after the third bleaching session. Data were evaluated by ANOVA and Tukey's test at a significance level of 5%. RESULTS: Differences on ∆E and ∆L were verified after the first and second bleaching sessions (p < 0.05) and showed stability after the third one, for all the groups. No differences were observed among HP, HP + BL, and HP + VL groups, regardless of the evaluation time (p > 0.05). HP and C showed the greatest and smallest reduction in dentin microhardness (p < 0.05), respectively. No difference between HP + BL and HP + VL protocols (P > 0.05) was observed. CONCLUSIONS: High concentration hydrogen peroxide (35%) photoactivated with violet LED bleached endodontically treated teeth effectively. However, the same protocol negatively affected the dentin microhardness, but not in the same level of 35% HP solely used.

Effectiveness and color stability of non-vital dental bleaching photoactivated by violet LED on blood-stained teeth.

BACKGROUND: Few studies have investigated the effect of violet LED irradiation associated or not with bleaching agents on blood-stained teeth. This in vitro study aimed to evaluate the whitening efficacy and color stability of non-vital dental bleaching using 35% hydrogen peroxide (HP) photoactivated with violet LED (VL) compared to 35% HP alone and 35% HP photoactivated with blue LED (BL). METHODS: Fifty bovine dental crowns were used to obtain specimens of 5 × 5 × 2 mm. After selection based on a previous colorimetric analysis, the specimens were blood-stained and randomly assigned into five groups (n = 10): control (no treatment); 35% HP, 35% HP/BL; 35% HP/VL; and VL. Three bleaching sessions were performed and the colorimetric analysis (∆Eab, ∆L, and ∆WID) was recorded after 7 days, 30 days, and 9 months of the last bleaching session. Two-way repeated measures ANOVA followed by Bonferroni post-hoc test was used at a significance level of 5%. RESULTS: 35% HP, 35% HP/BL, and 35% HP/VL showed higher values of ∆Eab, ∆L, e ∆WID (P < 0.05), without intra- and intergroup differences (P > 0.05). C and VL were similar in all the evaluation times (P > 0.05), showing lower values of ∆Eab, ∆L, and ∆WID (P < 0.05). CONCLUSIONS: 35% HP/VL can be a viable alternative for dental bleaching in endodontically-treated teeth, showing bleaching efficacy similar to 35% HP solely used, even after a 9-month follow-up. VL used alone was not effective to bleach blood-stained teeth.

Influence of smoking on the effectiveness of tooth whitening: a systematic review.

OBJECTIVES: Perform a systematic review to evaluate the influence of smoking on the effectiveness of tooth whitening (TW) and to analyze whether tooth sensitivity is different between smokers and non-smokers. MATERIALS AND METHODS: A systematic review modeled according to the PRISMA guidelines was conducted. PubMed, Embase, Web of Science, Cochrane, Scopus, and OpenGrey databases were searched for related clinical trials. The population, exposure, comparison, outcomes (PECO) was individuals who had TW performed, smoking individuals, non-smoking individuals, and effectiveness of TW, respectively. Risk of bias was assessed with the ROBINS-I tool, and data from included studies were extracted by two researchers independently. The certainty of the evidence was evaluated using the GRADE (Grading of Recommendations, Assessment, Development, and Evaluations) approach. RESULTS: Five studies were selected for qualitative analysis. The ROBINS-I tool classified 3 studies as having a moderate risk of bias, one study as having a serious risk of bias, and one with a critical risk. GRADE performed only for color change results and showed a low certainty of evidence. Limited evidence suggests that effectiveness of TW between smokers and non-smokers is similar. The tooth sensitivity also does not seem to be influenced by smoking. Due to the heterogeneity of the data, a meta-analysis could not be performed. CONCLUSIONS: Effectiveness of TW between smokers and non-smokers is comparable. The tooth sensitivity also does not seem to be influenced by smoking. CLINICAL RELEVANCE: The effectiveness of bleaching among smokers and non-smokers appears to be similar. Tooth sensitivity during TW also appears not to be influenced by smoking.

Solução estética conservadora em paciente jovem com fluorose: clareamento e microabrasão: relato de caso / Conservative aesthetic solution in a young patient with fluorosis: whitening and microabrasion: case report

Introdução: a fluorose constitui uma patologia que afeta os dentes desencadeada pelo excesso de ingestão de flúor. Sua manifestação ocorre a nível de esmalte na presença de manchas ou defeitos anatômicos. Objetivo: relatar o manejo clínico de um paciente com fluorose tratado com procedimento minimamente invasivo. Relato do caso: paciente do sexo feminino, 18 anos, apresentando queixas estéticas clinicamente observadas na vestibular dos dentes, com diagnóstico de lesões fluoróticas. Foi executado protocolo de dessensibilização com Ultra EZ por 5 min e aplicação do Verniz (Enamelast Fluoride) previamente ao tratamento clareador. Foram realizados duas sessões de clareamento com peróxido de hidrogenio 35% (DMC) por 45 min com intervalo de sete dias entre elas. Imediatamente após a segunda sessão de clareamento, foi realizado microabrasão com pasta abrasiva Whitness RM (FGM) e taça de borracha com fricção por 20 segundos. Resultados: o tratamento clareador associado a técnica da microabrasão do esmalte demonstrou resultado estético favorável, microinvasivo e eficaz no tratamento da fluorose. Conclusão: a associação dos tratamentos resolveu o problema estético da paciente de forma rápida e segura, conservando a estrutura dentária.

Introduction: fluorosis is a pathology that affects teeth triggered by excess fluoride intake. Its manifestation occurs at the enamel level in the presence of stains or anatomical defects. Objective: to report the clinical management of a patient with fluorosis treated with a minimally invasive procedure. Case report: female patient, 18 years old, presenting aesthetic complaints clinically observed in the buccal of the teeth, with a diagnosis of fluorotic lesions. A desensitization protocol was performed with Ultra EZ for 5 min and Varnish (Enamelast Fluoride) was applied prior to the bleaching treatment. Two bleaching sessions were performed with 35% hydrogen peroxide (DMC) for 45 min, with an interval of seven days between them. Immediately after the second bleaching session, microabrasion was performed with Whitness RM abrasive paste (FGM) and a rubber cup with friction for 20 seconds. Results: The bleaching treatment associated with the enamel microabrasion technique demonstrated a favorable, microinvasive and effective esthetic result in the treatment of fluorosis. Conclusion: the combination of treatments solved the patient's aesthetic problem quickly and safely, preserving the dental structure.

Effects of the Finishing Protocols and Oral Hygiene Procedures in the Microhardness and Surface Roughness of CAD/CAM Ceramics

ABSTRACT: The objective of this in vitro study was to evaluate the effects of finishing protocols and oral hygiene procedures on the surface and mechanical properties of CAD/CAM ceramics. Specimens (n = 96, (15x10x2mm) of the leucite glass-ceramic (LGC) and feldspathic ceramic (FP) received mechanical polishing or glazing. Surface roughness (Ra) and microhardness (VHN) were obtained with a profilometer and a hardness tester, respectively, before and after each oral hygiene procedure (TB: toothbrushing; PB: prophylaxis with paste and rubber cup; and BJ: prophylaxis with bicarbonate jet). ANOVA, paired t and Tukey's tests were applied (a=0.05). For both materials, only BJ affected Ra's values when mechanical polishing was performed. Moreover, no significant variations in VHN were observed only for LGC glazed with TB. Significant Ra and VHN changes in both materials were observed with BJ. Besides, BJ exhibited similar effects to TB on VHN, regardless of the material and finishing protocol used. Changes in mechanical and surface properties varied with the finishing protocol and the oral hygiene method. In general, prophylaxis with bicarbonate jet was the most harmful method for both materials and the type of finishing protocol did not have a protective effect against changes produced by oral hygiene methods.

RESUMEN: El objetivo de este estudio in vitro fue evaluar los efectos de los protocolos de acabado y los procedimientos de higiene oral sobre la superficie y las propiedades mecánicas de las cerámicas CAD/CAM. Los especímenes (n = 96, (15x10x2mm) de vitrocerámica de leucita (LGC) y cerámica feldespática (FP) recibieron pulido mecánico o glaseado. La rugosidad de la superficie (Ra) y la microdureza (VHN) se obtuvieron con un perfilómetro y un probador de dureza, respectivamente, antes y después de cada procedimiento de higiene oral (TB: cepillado dental; PB: profilaxis con pasta y vaso de hule; y BJ: profilaxis con chorro de bicarbonato). Se aplicaron ANOVA, t pareada y prueba de Tukey (a=0.05). Para ambos materiales, solo BJ afectó los valores de Ra cuando se realizó el pulido mecánico. Además, no se observaron variaciones significativas en VHN solo para LGC vidriado con TB. Se observaron cambios significativos de Ra y VHN en ambos materiales con BJ. Además, BJ exhibió efectos similares a TB en VHN, independientemente del material y protocolo de acabado utilizado Los cambios en las propiedades mecánicas y superficiales variaron con el protocolo de acabado y el método de higiene oral. En general, la profilaxis con chorro de bicarbonato fue el método más perjudicial, tanto los materiales como el tipo de protocolo de acabado no tuvieron un efecto protector frente a los cambios producidos por los métodos de higiene oral.

The effect of photobiomodulation using low-level laser therapy on tooth sensitivity after dental bleaching: a systematic review.

The authors aimed to conduct a systematic review to assess data from the current literature on the effectiveness of low-level laser therapy (LLLT) in preventing tooth sensitivity (TS) after tooth whitening (DB). PRISMA guidelines for systematic reviews were followed. Clinical trials evaluating the treatment of LLLT in patients with sensitivity after tooth whitening were selected. A full bibliographic search was performed on May 4, 2021, in the following databases: Embase, MEDLINE via PubMed, SciELO, VHL Regional Portal, Web of Science, Gray Literature, Scopus, ClinicalTrials.gov and Cochrane Library. This study followed Cochrane's recommendations for analyzing risk of bias. A total of 1054 studies were found (255 studies were excluded because they were duplicates and 785 because of titles and abstracts). Only 14 articles were selected for analysis, of which eight were excluded because they had one or more exclusion criteria, resulting in six articles included in this systematic review, the vast majority being classified as low risk of bias. The studies reviewed indicated that LLLT showed promise in preventing TS after TB. However, evidence is limited and more clinical trials with low risk of bias are needed to reach a definitive conclusion on the action of LLLT in pain control after TB.

Influence of different glaze firing protocols on the mechanical properties of CAD-CAM ceramic materials.

STATEMENT OF PROBLEM: The influence of different glaze firing protocols and cooling on the behavior of computer-aided design and computer-aided manufacturing (CAD-CAM) ceramics is unclear. PURPOSE: The purpose of this in vitro study was to investigate the influence of different glaze firing protocols on the abrasion resistance, surface roughness, microhardness, and brittleness index of CAD-CAM ceramics. MATERIAL AND METHODS: Rectangular specimens of IPS e.max CAD (MAX), IPS Empress CAD (PRE), and CEREC Blocs (CER) were obtained and divided into 5 groups according to the glaze firing protocol (n=8): control (CO), 1 conventional glaze firing (GF), 2 conventional glaze firings (GF2), 1 extended glaze firing (EG), and 2 extended glaze firings (EG2). The coefficient of friction (µ) was determined with the pin-on-disk test, and specimens were analyzed with an optical interferometer to calculate volume loss and roughness. Vickers microhardness and the brittleness index were obtained with a microdurometer. Microhardness data were evaluated by 2-way ANOVA and the Sidak tests (α=.05). Data from other tests were assessed with nonparametric ANOVA and Bonferroni tests (α=.05). RESULTS: Groups GF2, EG, and EG2 of MAX and PRE and all groups of CER presented higher levels of coefficient of friction. Groups EG and EG2 of MAX and CER showed high volume loss and surface roughness. Groups EG and EG2 of MAX and PRE showed lower hardness, as did all groups of CER. MAX-CO and groups GF and EG of PRE showed a lower brittleness index (P<.05), while CER groups showed no significant differences (P>.05). CONCLUSIONS: Ceramic specimens with conventional glaze firing presented less surface wear than those with extended glaze firing. The number of firings did not have a statistically significant influence.

Anti-erosive profile of an experimental 5% SnCl2 varnish containing different concentrations of NaF.

This in vitro study evaluated the anti-erosive effect of an experimental varnish containing 5% stannous chloride (SnCl2) associated with different concentrations of NaF (NaF-free, 2.5% NaF, or 5.2% NaF) on bovine enamel and root dentin. One hundred samples were pre-eroded (0.3% citric acid, pH 2.6, 10 min) and randomized into five groups (n=10 for each substrate): Negative control - milli-Q water; NaF-free - Experimental varnish SnCl2-free and NaF-free; 2.5 NaF - Experimental varnish 5% SnCl2 associated with 2.5% NaF; 5.2 NaF: Experimental varnish 5% SnCl2 associated with 5.2% NaF and positive control - Commercial varnish containing 5% NaF (Duraphat). After the varnishes were applied, the erosive and abrasive challenges were carried out for five days. Loss of tooth structure (TSL) was determined by optical profilometry, and the loss of calcium (ΔCa2+) using atomic absorption spectroscopy. Dentin analysis was also performed by SEM. A one-way ANOVA/Bonferroni test was performed to analyze the data (α=0.05). The experimental 2.5 NaF and 5.2 NaF groups showed greater effectiveness in preventing TSL when compared to the other groups (p <0.05), regardless of the substrate. In addition, these groups showed lower loss in Ca2+ content when compared to the other groups (p <0.05), for enamel and dentin. Dentin showed greater TSL and ΔCa2+ loss when compared to enamel in all treatments (p <0.05). The 5.2% and 2.5% NaF-containing experimental varnishes showed promising results in both, the prevention of TSL and the loss of Ca2+, regardless of the substrate studied.

Anti-erosive profile of an experimental 5% SnCl₂ varnish containing different concentrations of NaF

Abstract This in vitro study evaluated the anti-erosive effect of an experimental varnish containing 5% stannous chloride (SnCl₂) associated with different concentrations of NaF (NaF-free, 2.5% NaF, or 5.2% NaF) on bovine enamel and root dentin. One hundred samples were pre-eroded (0.3% citric acid, pH 2.6, 10 min) and randomized into five groups (n=10 for each substrate): Negative control - milli-Q water; NaF-free - Experimental varnish SnCl₂-free and NaF-free; 2.5 NaF - Experimental varnish 5% SnCl₂ associated with 2.5% NaF; 5.2 NaF: Experimental varnish 5% SnCl₂ associated with 5.2% NaF and positive control - Commercial varnish containing 5% NaF (Duraphat). After the varnishes were applied, the erosive and abrasive challenges were carried out for five days. Loss of tooth structure (TSL) was determined by optical profilometry, and the loss of calcium (ΔCa2+) using atomic absorption spectroscopy. Dentin analysis was also performed by SEM. A one-way ANOVA/Bonferroni test was performed to analyze the data (α=0.05). The experimental 2.5 NaF and 5.2 NaF groups showed greater effectiveness in preventing TSL when compared to the other groups (p <0.05), regardless of the substrate. In addition, these groups showed lower loss in Ca2+ content when compared to the other groups (p <0.05), for enamel and dentin. Dentin showed greater TSL and ΔCa2+ loss when compared to enamel in all treatments (p <0.05). The 5.2% and 2.5% NaF-containing experimental varnishes showed promising results in both, the prevention of TSL and the loss of Ca2+, regardless of the substrate studied.

Resumo Este estudo in vitro avaliou o efeito anti-erosivo de um verniz experimental contendo 5% de cloreto estanoso (SnCl₂) associado a diferentes concentrações de NaF (sem NaF, 2,5% NaF ou 5,2% NaF) sobre esmalte e dentina radicular bovinos. Cem amostras foram pré-erodidas (ácido cítrico 0,3%, pH 2,6, 10 min) e randomizadas em cinco grupos (n=10 para cada substrato): Controle negativo - água milli-Q; Sem NaF - Verniz experimental sem SnCl2 e sem NaF; 2,5 NaF - Verniz experimental 5% SnCl2 associado a 2,5% NaF; 5,2 NaF: Verniz experimental 5% SnCl2 associado a 5,2% NaF e controle positivo - Verniz comercial contendo 5% NaF (Duraphat). Após a aplicação dos vernizes, os desafios erosivos e abrasivos foram realizados por cinco dias. A perda de estrutura dentária (PED) foi determinada por perfilometria óptica e a perda de cálcio (ΔCa2+) por espectroscopia de absorção atômica. A análise da dentina também foi realizada por MEV. Um teste ANOVA/Bonferroni de uma via foi realizado para analisar os dados (α=0,05). Os grupos experimentais 2,5 NaF e 5,2 NaF apresentaram maior eficácia na prevenção de PED quando comparados aos demais grupos (p<0,05), independentemente do substrato. Além disso, esses grupos apresentaram menor perda no teor de Ca2+ quando comparados aos demais grupos (p<0,05), para esmalte e dentina. A dentina apresentou maior PED e de ΔCa2+ quando comparada ao esmalte em todos os tratamentos (p<0,05). Os vernizes experimentais contendo NaF 5,2% e 2,5% apresentaram resultados promissores tanto na prevenção de PED quanto na perda de Ca2+, independente do substrato estudado.

Impact of Finishing Protocols on Color Stability of CAD/CAM Ceramics: A Systematic Review.

PURPOSE: To analyze the current evidence on the impact of surface finishing protocols (such as manual polishing or glazing) on the color stability of in vitro simulated pigmentation of CAD/CAM ceramics. MATERIALS AND METHODS: Five electronic databases were searched on February 12, 2020. In vitro experimental studies were included based on the following strategy: intervention = surface treatment of CAD/CAM ceramics with glazing agents; comparison = surface treatment of CAD/CAM ceramics with manual polishing; and outcomes = color stability. Two reviewers independently assessed the risk of bias. RESULTS: Among 1,390 articles that were screened, 6 in vitro studies were considered for qualitative analysis. Five articles confirmed changes in the color of ceramics when they were immersed in pigmented solutions. One article investigated the color stability of the samples via ultraviolet (UV) aging. Among the 6 studies analyzed, 4 showed clinically acceptable color alteration values represented by ΔE irrespective of the finishing protocol applied (glazing or mechanical polishing). Two articles presented clinically unsatisfactory color variation (ΔE > 3.3 and ΔE > 2.7) following mechanical polishing of a zirconia-reinforced lithium silicate ceramic. Coffee and red wine proved to be the beverages with the greatest potential for ceramic pigmentation. Only 1 article had a high risk of bias. CONCLUSION: For clinicians, most of the studies demonstrated that both manual polishing and glaze application can prevent significant color alterations on CAD/CAM ceramic surfaces. However, due to the relatively limited amount of evidence to support this conclusion, further studies must be conducted.

Odontologia para Pacientes com Necessidades Especiais no ensino de graduação: percepção de discentes e docentes em uma instituição do Piauí e um panorama brasileiro / Dentistry for Special Needs Patients in undergraduate teaching: perception of students and professors at a university in Piaui and a Brazilian overview

A inexperiência do graduando em Odontologia no manejo de Pacientes com Necessidades Especiais (PNE) gera lacunas na formação e pode contribuir para a barreira de acesso desses indivíduos aos serviços de saúde bucal. Este estudo analisou a percepção de discentes e docentes do curso de Odontologia da Universidade Federal do Piauí (UFPI)sobre a inclusão de atendimento a PNE no ensino de graduação e o panorama nacional da oferta de disciplina de PNE na estrutura curricular de cursos de Odontologia. Foi realizado um estudo transversal, descritivo e exploratório, com aplicação de questionários a discentes e docentes do curso de Odontologia da UFPI. As matrizes curriculares dos cursos foram consultadas em endereços eletrônicos institucionais. Foi realizada análisedescritiva dos dados e teste Exato de Fisher foi aplicado. A maioria dos discentes relataram nunca ter atendido um PNE (54,8 %) e,destes, 67,7% não se sentem preparados para este atendimento. A maioria dos discentes (84,7%) e docentes (53,8%) aprova a obrigatoriedade da disciplina de PNE na estrutura curricular. Insegurança foi a reação mais comum dos discentes ao atendimento odontológico fictício a um paciente PNE. Entre os docentes participantes do estudo, 73,1% informaram já ter atendido PNE. Em 67,8% dos cursos de Odontologia pesquisados há oferta de disciplina de PNE. Em conclusão, a ausência de atendimento a PNE gera insegurança aos graduandos em Odontologia. A inclusão do tema PNE na matriz curricular é apoiada por discentes e docentes. A disciplinaestá presente na maioria dos cursos de Odontologia do Brasil (AU).

Dentistry undergraduates do not acquire much experience managing Patients with Special Needs (PSN) during their university training. This knowledge deficit contributes to the situation where PSNs face barriers to accessing oral health services. This study was a cross-sectional, descriptive and exploratory study about the perception of Dentistry students and professors at the Federal University of Piaui (UFPI -Brazil) on whether care of PSN should be included in their course. The reactions ofstudents facing a simulated situation of dental care for PSN was also analyzed. A survey of the situation regarding PSN inclusion at other universities in Brazil was alsocarried out. Professors and students filled out questionnaires and information regarding university curriculums was collected from their websites. Descriptive data analysis was performed, and Fisher's exact test was applied. Most UFPI students reported never having treated a PSN (54.8%) and, of these, 67.7% did not feel confident to providethis treatment. Most professors (73.1%) reported having treated PSN. Most students (84.7%) and professors(53.8%) agree that Dentistry for PSN should be mandatory in the curricular structure. Lack of confidencewas the most common reaction of students to a simulation ofdental care for a PSN. Dentistry for PSN is part of the curriculum of 67.8% of the Dentistry courses surveyed. In conclusion, the lack of Dentistry for PSN during student training can makedentists-to-be unsure about how to treat PSN in real-life situations. The inclusion of dental care for PSN in the curriculum is supported by students and teachers. The topic is present in most Dentistry courses in Brazil (AU).

Factors associated with oral health-related quality of life in homeless persons: a cross-sectional study.

This study aimed to evaluate the clinical and sociodemographic factors associated with the oral health-related quality of life (OHRQoL) of homeless persons. A cross-sectional study was conducted, with participants (n = 176) attending a Specialized Reference Center for the Homeless Population in Teresina, Brazil. Dental caries (DMFT index, WHO criteria), periodontal disease (CPI index), and the consequences of untreated caries (PUFA index) were measured by a single calibrated examiner (Kappa ≥0.83). Sociodemographic, oral health, and OHRQoL (OHIP-14) data were obtained through interviews. Data analysis included descriptive statistics and Poisson regression, with a significance level of 5%. Most of the participants were male (86.4%) and from the age group of 30 to 43 years (52.2%). Mean DMFT was 11 (SD ± 6.9) and mean total PUFA score was 1.2 (SD ± 2.2). Most of the participants (88.6%) had dental calculus and 8.5% and 1.7% of the sample had gingival bleeding and periodontal pocket > 3.5mm, respectively. The highest prevalence of negative impact in the OHRQoL was associated with females (1.4 (95%CI 1.1-1.7)), low educational level (2.0 (95%CI 1.3-3.0)), caries (1.6 (95%CI 1.1-2.6)), fistulas (1.9 (95%CI 1.3-3.1)), gingival bleeding (1.7 (95%CI 1.1- 2.7)), dental calculus (1.8 (95% CI 1.3-2.5)), periodontal pockets > 3 mm (1.5 (95%CI 1.1-2.0)), and need for extraction (2.3 (95%CI 1.1-5.0)). In conclusion, the negative impact on the OHRQoL of homeless persons was associated with low educational level, presence of decayed teeth, gingival bleeding, and dental calculus.

Effect of fixed orthodontic appliances on self-assessment and diagnosis of halitosis in undergraduate dental students.

BACKGROUND: The effects of fixed orthodontic therapy on the occurrence of halitosis are not yet fully understood. This study aimed to evaluate the effect of fixed orthodontic appliances on self-assessment and diagnosis of halitosis in undergraduate dental students. MATERIALS AND METHODS: Sixty-two undergraduate dental students were included in this cross-sectional study. Two groups (n = 31 per group) were composed of participants with (study group) or without (control group) fixed orthodontic appliance. Halitosis self-assessment and clinical diagnosis were assessed using a visual analogic scale (VAS) and sulfur volatile compounds (SVCs) assessment, respectively. The subjective (VAS) and objective (SVC) malodor assessments were classified in absence, light, moderate, or severe malodor. Chi-square Pearson test and Spearman's correlation were applied for data analysis, with a significance level of 5%. RESULTS: The use of fixed orthodontic appliances had no effect on self-assessment (P = 0.490) or clinical diagnosis (P = 0.610) of halitosis. Self-assessment was not significantly associated with the diagnosis of halitosis regardless the use of fixed orthodontic appliance (P ≥ 0.737). Male participants showed higher diagnosis of halitosis (P = 0.007). SVC measurements showed the absence of halitosis in 51.6% and 58.1% of participants with or without orthodontic appliances, respectively. CONCLUSION: The use of fixed orthodontic appliances affected the self-assessment of halitosis but no SVC measurements. It was not verified a correlation between subjective and objective methods to diagnose halitosis in dental students.

Blue Covarine Toothpaste versus Office Whitening: Which is the Most Effective on Stained Teeth? / Creme Dental de Blue Covarine Versus Clareamento de Consultório: Qual é o Mais Efetivo em Dentes Pigmentados?

Alternative whitening strategies to hydrogen peroxide have been proposed, such as the inclusion of abrasive and/or pigmented particles in the toothpaste. This study compared the whitening effectiveness of a toothpaste containing Blue Covarine (BC) vs. an in-office whitening treatment using 35% hydrogen peroxide (HP) in teeth stained. Bovine incisors blocks (6.0x6.0x2.0 mm) were stained with green tea (GT), orange soda (OS), or red wine (RW). The samples were randomly assigned into 8 groups (n=15), according to the type of staining and whitening treatment: G1 ­ no staining, BC (Control); G2 ­ no staining, HP (Control); G3 ­ GT, BC; G4 ­ GT, HP; G5 ­ OS, BC; G6 ­ OS, HP; G7 ­ RW, BC; G8 ­ RW, HP. Color change (ΔE), luminosity (L*), green-red axis (a*), and blue-yellow axis (b*) were recorded with spectroscopy at T0 ­ baseline, T1 ­ immediately after toothbrushing or in office tooth whitening, and T2 ­ after the conclusion of the treatments. The whiteness index for dentistry (WID) was calculated. Data were analyzed by two-way repeated measured mixed ANOVA and Bonferroni test (α=0.05). HP showed a better whitening performance (ΔE) (p ≤ 0.042). Otherwise, no effects of the whitening agent were observed (p = 1.000). Data from ΔL, Δa, and Δb showed statistically significant differences for experimental groups (p < 0.001). In the WID analysis, BC and HP had similar effects within control and RW groups. In conclusion, blue covarine toothpaste may be a viable option for extrinsically stained teeth. However, for severe staining, HP-based whitening agents proved to be the most effective treatment strategy. (AU)

Estratégias de clareamento alternativas ao peróxido de hidrogênio têm sido propostas, como a inclusão de partículas abrasivas e/ou pigmentadas nos cremes dentais. Este estudo comparou a eficácia clareadora de um creme dental contendo Blue Covarine (BC) com um tratamento de clareamento em consultório com peróxido de hidrogênio a 35% (HP) em dentes pigmentados. Blocos de incisivos bovinos (6,0x6,0x2,0 mm) foram pigmentados com chá verde (GT), refrigerante de laranja (OS) ou vinho tinto (RW). As amostras foram distribuídas aleatoriamente em 8 grupos (n = 15), de acordo com o tipo de pigmento e tratamento clareador: G1 - sem coloração, CB (Controle); G2 - sem coloração, HP (Controle); G3 - GT, BC; G4 - GT, HP; G5 - OS, BC; G6 - SO, HP; G7 - RW, BC; G8 - RW, HP. Mudança de cor (ΔE), luminosidade (L *), eixo verde-vermelho (a*) e eixo azul-amarelo (b*) foram registrados com espectroscopia em T0 - baseline, T1 - imediatamente após a escovação ou clareamento dental em consultório, e T2 - após a conclusão dos tratamentos. O índice de brancura para odontologia (WID) foi calculado. Os dados foram analisados por ANOVA mista de duas vidas para medidas repetidas e teste de Bonferroni (α = 0,05). HP apresentou melhor desempenho de clareamento (ΔE) (p ≤ 0,042). Os dados de ΔL, Δa e Δb mostraram diferenças estatisticamente significativas para os grupos experimentais (p <0,001). Na análise WID, BC e HP tiveram efeitos semelhantes nos grupos controle e RW. Em conclusão, o creme dental covarine azul pode ser uma opção viável para dentes com coloração extrínseca. No entanto, para manchas graves, os agentes de clareamento à base de HP provaram ser a estratégia de tratamento mais eficaz. (AU)

Effect of Sodium Ascorbate or Alpha-Tocopherol on the Resin-Dentin Interface and Bond Strength after Endodontic Treatment and Bleaching

ABSTRACT: The objective of this in vitro study was to assess the effects of two antioxidants (sodium ascorbate [SA] and alpha-tocopherol [AT]) on the adhesive interface and dentin bond strength immediately after bleaching with 38 % hydrogen peroxide (38HP) in endodontically-treated teeth. Two stages of experimentation were carried out. Bovine incisors were allocated into four groups (n = 10/group for each experiment): NB, non-bleached restored crowns; 38HP, bleached and immediately restored crowns; 38HP-SA, bleached crowns and SA use; and 38HP-AT, bleached crowns and AT use. Hybrid layer length in dentin (μm) and bond strength (MPa) were assessed with confocal microscopy laser and micro-shear bond strength (μSBS) test, respectively. Failure mode was determined by stereomicroscope. Data analysis was performed with analysis of variance (ANOVA) and Kruskal-Wallis, Dunn, Tukey, and Fisher-exact tests (a = 0.05). Higher values of hybrid layer length were observed similarly in the NB and 38HP-SA groups. The highest μSBS mean values were observed in the NB group (18 .51 ? 1.33), whereas the SBS values for 38HP-AT (1.68 ? 0.32) were similar to the 38HP group (1.61 ? 0.51) (p > 0.05) and significantly lower than the 38HP-SA group (5.78 ? 0.71). Adhesive failures were predominant in the 38HP and 38HP-AT groups. Cohesive and mixed failures were mostly observed in the NB and 38HP-SA groups, respectively. In conclusion, AT has no immediate effect on the hybrid layer formation and μSBS of dentin. Although SA promotes an increase in hybrid layer formation, it was not reflected in the μSBS values.

RESUMEN: El objetivo de este estudio in vitro fue evaluar los efectos de dos antioxidantes (ascorbato de sodio [AS] y alfa-tocoferol [AT]) sobre la interfaz adhesiva y la fuerza de unión de la dentina inmediatamente después del blanqueamiento con peróxido de hidrógeno al 38 % (38HP) en endodoncia. -Dientes tratados. Se llevaron a cabo dos etapas de experimentación. Los incisivos bovinos se dividieron en cuatro grupos (n = 10 / grupo para cada experimento): NB, coronas restauradas no blanqueadas; 38HP, coronas blanqueadas y restauradas inmediatamente; 38HP- AS, coronas blanqueadas y uso SA; y 38HP-AT, coronas blanqueadas y uso de AT. La longitud de la capa híbrida en dentina (μm) y la fuerza de unión (MPa) se evaluaron con láser de microscopía confocal y la prueba de fuerza de unión por micro-cizallamiento (μSBS), respectivamente. El modo de falla se determinó mediante estereomicroscopio. El análisis de los datos se realizó con análisis de varianza (ANOVA) y pruebas de Kruskal-Wallis, Dunn, Tukey y Fisher (α = 0,05). De manera similar, se observaron valores más altos de longitud de capa híbrida en los grupos NB y 38HP-AS. Los valores medios más altos de μSBS se observaron en el grupo NB (18,51 ? 1,33), mientras que los valores de SBS para 38HP-AT (1,68 ? 0,32) fueron similares a los del grupo 38HP (1,61 ? 0,51) (p> 0,05) y significativamente más bajos que el grupo 38HP-AS (5,78 ? 0,71). Las fallas adhesivas fueron predominantes en los grupos de 38HP y 38HP-AT. Las fallas cohesivas y mixtas se observaron principalmente en los grupos NB y 38HP-AS, respectivamente. En conclusión, la AT no tiene un efecto inmediato sobre la formación de la capa híbrida y el μSBS de dentina. Aunque AS promueve un aumento en la formación de capas híbridas, no se refleja en los valores de μSBS.

Factors associated with depression, anxiety and stress among dentists during the COVID-19 pandemic.

The objective of this work was to evaluate the relationship between factors associated with the COVID-19 pandemic and depression, anxiety, and stress (DAS) in dentists. Factors associated with the COVID-19 pandemic were evaluated using a questionnaire and scores of the Depression, Anxiety, and Stress Scales-21 were measured. The differences between the DAS scores based on the factors associated with the COVID-19 pandemic were tested through the successive application of multivariate analysis of variance (MANOVA, α = 0.05). After a sample size calculation, 998 participants with a mean age of 39.39 (± 11.69) years were included. The effect size indicated that changes in sleep quality (η2 = 0.161), eating habits (η2 = 0.057), and physical health (η2 = 0.051) were the ones that most negatively affected DAS scores. The highest DAS scores were observed in professionals who lived with someone at high-risk for COVID-19 (p < 0.001) and in those who did not engage in leisure activities during the pandemic (p < 0.001). Dentists who worked on the frontline against COVID-19 had higher scores of anxiety and stress (p = 0.029). The highest scores for anxiety, depression, and/or stress were seen in dentists living with someone at high-risk for COVID-19, who acts on the frontline, who does not practice in leisure activities during the pandemic, who completely changed eating habits, quality of sleep and physical health during the pandemic. In general, DAS levels of dentists were associated with factors related to the COVID-19 pandemic.

Effect of post-space irrigation with acid solutions on bond strength and dentin penetrability using a self-adhesive cementation system.

BACKGROUND: The aim of this study was to evaluate the effects of surface treatments with 1% peracetic acid (PA), solution containing 17% EDTA (SmearClear, Kerr Endodontics), solution containing a combination of 17% EDTA with 2% chlorhexidine (QMix, Dentsply Sirona) on the post-space root dentin compared to 2.5% sodium hypochlorite (NaOCl) on bond strength and resin tags length in dentin. MATERIAL AND METHODS: Forty human-canine roots were endodontically treated and the post space was prepared. The specimens were randomised into four groups (n = 10): control - irrigation with 2.5% NaOCl solution, PA - irrigation with 1% PA, SmearClear - irrigation with SmearClear solution, and QMix - irrigation with QMix solution. The fibre posts were cemented using a self-adhesive resin system (Relyx U200, 3M ESPE). After six months, the specimens were cross-sectioned and subjected to push-out and confocal laser microscopy tests. One-way ANOVA and Tukey's tests were used to analyse the data (α= 0.05). RESULTS: PA and QMix presented the highest bond strength values compared to the other groups (p< 0.05). There was no significant difference between the resin tags length in dentin by the groups (p = 0.75). CONCLUSIONS: Irrigation of the post space with 1% PA and QMix showed a positive clinical impact on the adhesion between the fiber post and root dentin. However, these materials had no influence on resin tags length in dentin by self-adhesive resin cement. Key words:Fiber post, adhesive cementation, self-adhesive resin cement, root dentin, irrigating solutions.

Temporary cement residues affect the bond strength and dentin penetration of self-adhesive resin cement in fiberglass post cementation.

This study evaluated the persistence of eugenol-containing (PR, Provy) or eugenol-free (RT, Relyx Temp, and TB, Temp Bond) temporary cement residues and its effects on push-out bond strength and dentinal penetration of the self-adhesive resin cement (Relyx U200). Eighty human roots were endodontically treated and post space prepared. Fourty specimens were distributed in four groups (n = 10): Control (CO), without any clinical procedure, PR, RT, and TB, where a metallic post was cemented with one of the temporary cements. After metallic post removal, hemi sections post space were submitted to SEM analysis. Another specimens were distributed in similar groups, but fiberglass post was cemented using Relyx U200 cement and submitted to push-out bond strength and dentinal penetration cement analysis, in post space thirds. SEM analysis were evaluated by Kruskal-Wallis and Dunn tests, while bond strength and dentinal penetration were evaluated by ANOVA One-Way and Tukey test (p < .05). Only in apical thirds, PR, RT, and TB showed higher persistence of residues than CO. In bond strength, PR, RT, and TB showed lower values than CO, in all post space thirds (p < .05). But to dentinal penetration, PR, RT, and TB presented lower values than CO only in apical thirds (p < .05). There is the greatest persistence of temporary cement residues only in apical post space third, providing less dentinal penetration of the self-adhesive resinous cement. However, the previous use of temporary cements has negative effects on the bond strength cementation system, regardless of the third evaluated.